Match List – I with List – II.

(A) AC generator                 (I) Detects the presence of current in the circuit

(B) Galvanometer               (II) Converts mechanical energy into electrical energy

(C) Transformer                  (III) Works on the principle of resonance in AC circuit

(D) Metal detector             (IV) Changes an alternating voltage for smaller or greater value

Choose the correct answer from the options given below:

Option 1 -

(A) – (II), (B) – (I), (C) – (IV), (D) – (III)

Option 2 -

(A) – (II), (B) – (I), (C) – (III), (D) – (IV)

Option 3 -

(A) – (III), (B) – (IV), (C) – (II), (D) – (I)

Option 4 -

(A) – (III), (B) – (I), (C), (II), (D) – (IV)

3 Views | Posted 2 months ago

Asked by Shiksha User

No answers yet.

Can you answer this question?

Similar Questions for you

Power factor of series LCR circuit at resonance is

Vishal Baghel

At resonance V_L = V_C

_{$\Rightarrow c o s ? = \frac{V_{R}}{\sqrt[]{V_{R}^{2} + {(V_{L} - V_{C})}^{2}}} = 1$}

An electric bulb and a capacitor are connected in series with an AC source. On increasing the frequency of the source, the brightness of the bulb:

Vishal Baghel

$X_{C} = \frac{1}{ω C}$

On increasing $ω$ XC decreases so Z decreases, current in circuit increases.

A direct current of 4 A and an alternating current of 4 A flows through two identical resistors. The ratio of heat produced in the two resistances in same time interval will be

Vishal Baghel

$\frac{H_{D . C .}}{H_{A . C .}} = \frac{I^{2} R}{I_{r m s}^{2} R} = 1$

The value of alternating emf (E) in the given circuit will be

Vishal Baghel

$E = \sqrt[]{V_{R}^{2} + {(V_{L} - V_{C})}^{2}}$

$E = \sqrt[]{{(60)}^{2} + {(100 - 20)}^{2}}$

E = 100V

Figure shows a circuit that contains four identical resistors with resistance R = $2.0 Ω,$ two identical inductors with inductance L = 2.0mH and an ideal battery with emf E = 9V. The current ‘i’ just after switch ‘S’ is closed will be: