To increase the resonant frequency in series LCR circuit,

Option 1 -

Source frequency should be increased.

Option 2 -

Another resistance should be added in series with the first resistance.

Option 3 -

Another capacitor should be added in series with the first capacitor.

Option 4 -

The source frequency should be decreased.

2 Views | Posted 3 months ago

Asked by Shiksha User

1 Answer

Answered by

Vishal Baghel | Contributor-Level 10

3 months ago

Correct Option - 3

Detailed Solution:

$f = \frac{1}{2 π \sqrt[]{L C}}$

$f α \frac{1}{\sqrt[]{C}}$

Another capacitor should be added in series with the first capacitor.

0 Upvotes 0 Downvotes

Similar Questions for you

Power factor of series LCR circuit at resonance is

Vishal Baghel

At resonance V_L = V_C

_{$\Rightarrow c o s ? = \frac{V_{R}}{\sqrt[]{V_{R}^{2} + {(V_{L} - V_{C})}^{2}}} = 1$}

An electric bulb and a capacitor are connected in series with an AC source. On increasing the frequency of the source, the brightness of the bulb:

Vishal Baghel

$X_{C} = \frac{1}{ω C}$

On increasing $ω$ XC decreases so Z decreases, current in circuit increases.

A direct current of 4 A and an alternating current of 4 A flows through two identical resistors. The ratio of heat produced in the two resistances in same time interval will be

Vishal Baghel

$\frac{H_{D . C .}}{H_{A . C .}} = \frac{I^{2} R}{I_{r m s}^{2} R} = 1$

The value of alternating emf (E) in the given circuit will be

Vishal Baghel

$E = \sqrt[]{V_{R}^{2} + {(V_{L} - V_{C})}^{2}}$

$E = \sqrt[]{{(60)}^{2} + {(100 - 20)}^{2}}$

E = 100V

Figure shows a circuit that contains four identical resistors with resistance R = $2.0 Ω,$ two identical inductors with inductance L = 2.0mH and an ideal battery with emf E = 9V. The current ‘i’ just after switch ‘S’ is closed will be: