Ask & Answer: India's Largest Education Community
All Questions
New Question
11 months agoContributor-Level 10
Yes, M Polytechnic College admissions are currently open for its offered courses. Students can visit the official website of the college to apply for the preferred course by filling out the registration form and completing the process. Further, admissions are made on the basis of preset admission criteria as specified by the college. For any information or further details, students may visit the official website of the college.
New Question
11 months agoContributor-Level 10
The University College London & King's College are two of the most prominent higher educational institutes in London.
When it comes to local rankings, University College London has the upper hand with a London-wide rank #2, while King's College London ranks #4 for the same.
As far as acceptance rates go, UCL (36%) again gets the better of KCL (13%), with admissions thrice as easy as it is at King's College.
The table below gives a detailed comparison between the two:
Criteria | University College London | King's College |
|---|---|---|
Acceptance Rate | 36% | 13% |
Popular Programs | Computer Science. Business Management, Biomedical Science | Medicine & Health Science, Engineering |
Tuition Fee (BE/B.Tech) | INR 31.1 L-INR 46.3 L | INR 31.7 L-INR 40.4 L |
Shiksha Popularity Ranking | #2 | #8 |
New Question
11 months agoContributor-Level 10
There are 33 seats available in BBA course DoMS for General catgory (25 for All India students and 8 for Telangana students). 14 seats are available for OBC, 9 for SC, 6 for EWS and 4 for ST category students.
New Question
11 months agoContributor-Level 10
15.16
(i) Ethylene dichloride
(ii) Tetrafluoroethene
(iii) Phenol and formaldehyde
New Question
11 months agoContributor-Level 10
The key highlights recorded during RIT Kolhapur BTech Placements are:
Particulars | Placement Statistics (2024) |
|---|---|
Placement rate | 64.29% (Automobile) 100% (Civil Engineering) 94.41% (CSE) 87.5% (Electrical) 100% (Mechatronics) 93.33% (etc.) 96.49% ( CS & IT) 92.41% (Mechanical) |
No. of Offers | 441 (BTech) |
the highest package | INR 9.13 LPA (BTech) |
Average package | INR 1.46 LPA (Automobile) INR 2.38 LPA (Civil Engineering) INR 4.34 LPA (CSE) INR 3.44 LPA (Electrical) INR 3.75 LPA (Mechatronics) INR 4.46 LPA (etc.) INR 4.46 LPA ( CS & IT) INR 4.14 LPA (Mechanical) |
No. of companies | 3 (Automobile) 12 (Civil Engineering) 23 (CSE) 8 (Electrical) 9 (Mechatronics) 20 (etc.) 23 ( CS & IT) 19 (Mechanical) |
No. of Students placed | 9 (Automobile) 13 (Civil Engineering) 129 (CSE) 40 (Electrical) 47 (Mechatronics) 50 (etc.) 49 ( CS & IT) 65 (Mechanical) |
New Question
11 months agoContributor-Level 10
DOMS offers a total of 66 seats for its BBA programme in 2025. These seats are distributed across various categories, including General, SC, ST, OBC, and EWS, with allocations for both All India candidates and Telangana residents.
New Question
11 months agoContributor-Level 10
No, direct admissions into MFA courses at the College of Arts, University of Delhi, are not allowed. To get admission into this course, candidates are required to complete their BFA degree according to the chosen specialsiations. Moreover, the admission is based on CUET PG scores, followed by Practical-Test/ Viva Voce conducted by the college. Therefore, admissions into Masters of Fine Arts are done through CUET PG all over India.
New Question
11 months agoContributor-Level 10
15.15
Thermoplastic Polymers: They are linear or slightly branched long chain molecules capable of repeatedly softening on heating and hardening on cooling. They possess intermolecular forces of attraction intermediate between elastomers and Some common thermoplastics are polythene, polystyrene, polyvinyl, etc.
Thermosetting Polymers: They are cross-linked or heavily branched molecules, which on heating undergo extensive cross-linking in moulds and again become infusible. Some common examples are Bakelite, urea-formaldehyde resins, etc.
New Question
11 months agoContributor-Level 10
University College London is a popular recruitment destination for some popular for-profit & non-profit organizations in the US & abroad.
The institute's graduates are on the receiving end of job offers from the likes of National Health Service (NHS), Deloitte, PwC, EY, KPMG, Amazon, Accenture, JP Morgan Chase & Co, as well as the University of Oxford.
New Question
11 months agoContributor-Level 10
The median salary earned by a graduate stands at GBP 32,000 (INR 35.8 L), while the mean salary figure stands at GBP 36,264 (INR 40.6 L), per the latest UCL Placement Data.
UCL graduates are employed at some of the best organizations in the world, in over 165 countries, with the total percentage of graduates employed full-time or pursuing higher studies being 81.2%.
New Question
11 months agoContributor-Level 10
A total of 135 recruiters took part during RIT Kolhapur placements some of them are:
RIT Kolhapur Placements: Top Recruiters | |
|---|---|
TCS | Cognizant |
Accenture | Intellipaat |
QSpiders | Wipro |
Capgemini | HDFC Bank |
New Question
11 months agoContributor-Level 10
The UCL Placement rate stands at 76.3% as per the latest employment data made available by the University College London.
UCL graduates are employed across a number of prominent industries such as: Health & Social Care, Accountancy, Teaching & IT among others.
The healthcare industry was the most pursued one by the university graduates, with a placement rate of 15%, while Logistics & Distribution was the least employing field with only 0.6% of the UCL graduates employed there.
New Question
11 months agoContributor-Level 10
15.14
The chain is initiated by free radicals, Ra•, produced by the reaction between some of the ethene and the oxygen initiator.
Chain propagation
Each time a free radical hits an ethene molecule a new longer free radical is formed.
Ra• + CH2 = CH2→ RaCH2CH2•
RaCH2CH2• + CH2 = CH2→ RaCH2CH2CH2CH2 •
Chain termination
Eventually two free radicals hit each other producing a final molecule. The process stops here because no new free radicals are formed.
Ra(CH2)m• + •(CH2)n Ra → Ra(CH2)m(CH2)nRa
Because chain termination is a random process, polyethene will be made up of chains of all sorts of diffe
New Question
11 months agoContributor-Level 10
Deakin University and Monash University are some of the top ranked universities for higher studies in Australia. Both universities offer something unique for its international students to stand out of the herd. Deakin University is located in Burwood Victoria, Australia and Monash University is located in Melbourne Victoria, Australia. Check the comparison mentioned below Deakin University and Monash University. This will surely help students in gaining more clarity on both the universities respectively:
Parameters | Deakin University | Monash University |
|---|---|---|
Shiksha Popularity Rankings | #173 in world | #51 in World |
Establishment | 1974 | 1958 |
Location | Burwood, Victoria, Australia | Melbourne, Victoria, Australia |
Acceptance Rate | 75% | 40% |
QS Rankings 2025 | #197 | #37 |
Average Salary | INR 55.7 L | INR 45 L |
UG Annual Tuition Fee | INR 16.36 L - 33.48 L | INR 17.8 L - 30.99 L |
PG Annual Tuition Fee | INR 8.67 L - 43.67 L | INR 8.18 L - 49.95 L |
Popular Streams | Business | Commerce | Psychology | Arts | Design | Engineering | Education |
New Question
11 months agoContributor-Level 10
The average package offered during RIT Kolhapur placements 2024 is given the table below:
Particulars | Placement Statistics (2024) |
|---|---|
Average package | INR 4 LPA (BTech) INR 1.46 LPA (Automobile) INR 2.38 LPA (Civil Engineering) INR 4.34 LPA (CSE) INR 3.44 LPA (Electrical) INR 3.75 LPA (Mechatronics) INR 4.46 LPA (etc.) INR 4.46 LPA ( CS & IT) INR 4.14 LPA (Mechanical) INR 3.3 LPA (MBA) INR 2.74 LPA (Diploma) INR 1.48 LPA (BBA) |
New Question
11 months agoContributor-Level 10
15.13
Copolymers are those polymers that consist of more than one monomeric repeating unit. Copolymerisation is a process of reacting a mixture of more than one monomeric species and form a copolymer. The copolymer can be made not only by chain growth polymerisation but by step growth polymerisation also. For example, a mixture of 1, 3 – butadiene and styrene forms Buna-S and 1-3 – butadiene and acrylonitrile form Buna-N.
New Question
11 months agoContributor-Level 10
15.12
In Addition polymerisation, monomers generally join together to form saturated There are three steps to chain reaction to form addition polymer, they are initiation, propagation and termination. In condensation polymerisation, functional groups of two monomers react together to release a small molecule to form a polymer. Generally, small molecules like water or HCl are released as by-products.
New Question
11 months agoContributor-Level 10
Yes, UCL considers IELTS Academic test scores to grant admissions to international students, alongside TOEFL, PTE Academic & Cambridge English Test.
The test score requirement vary greatly for different courses, the below table shows the minimum language tests scores for admission to a BSc in Computer Science course.
Test | Minimum Score |
|---|---|
92 | |
6.5 | |
Cambridge English: C2 | 176 |
75 |
New Question
11 months agoBeginner-Level 5
Diploma in Physiotherapy Colleges in Kolkata
- NRS Medical College (Nil Ratan Sircar Medical College)
Type: Government
Program: Diploma in Physiotherapy
Overview: As one of Kolkata's premier government medical colleges, NRS offers a well-structured DPT programme with a strong emphasis on clinical training.
Affiliation: State Medical Faculty of West Bengal (SMFWB)
2. The George Telegraph Training Institute
Type: Private
Program: Diploma in Physiotherapy Technology
Overview: Known for its vocational training programs, this institute provides a DPT course focusing on practical skills and industry readiness.
3. Sree Ramkrishna Yogasram
Type: Priv
New Question
11 months agoContributor-Level 10
For Admission to graduate programs, one needs to maintain a minimum GPA of 6.5-8.5/10 or 55%-70%.
Admissions to an undergraduate program requires the scores: 90,85,85,85,85 in 5 core subjects of the 12th standard.
The minimum GPA needed to be eligible for a study abroad program is the International equivalent of 3.3 on a 4.0. scale.
Register to get relevant
Questions & Discussions on your feed
Ask & Answer
Panel of Experts
