Ask & Answer: India's Largest Education Community
All Questions
New Question
a year agoBeginner-Level 5
The placements for MBA students is not good here. About 70-80% were placed in 2017, the highest package was approximately 15 LPA, the lowest is 2.8 LPA, and the average package is 4 LPA. Many companies visit our campus like Wipro, Infosys, Tata Motors, Mahindra Finance, etc. Almost all the students got the internship from the college.The college brings more than 2000 companies on campus including both big and small companies
New Question
a year agoContributor-Level 10
100+ companies visited Sinhgad College of Engineering for placements in 2024. Several top recruiters regularly visit for B.Tech placements including Tata Consultancy Services (TCS), Accenture, Capgemini, Cognizant, Infosys, etc. The highest package offered recently was around INR 17 LPA, while the average stood at approximately INR 4.5 LPA.
New Question
a year agoGuide-Level 15
For the most part, course-wise placements at Sinhgad College of Engineering are strong and also reflect the robust training and placement cell on campus. CSE graduates reported an average package of about INR 6.5 LPA during the recent placement season, in addition to top companies such as Accenture, Cognizant, and TCS actively recruiting. The average package for Electronics and Telecommunication was about INR 5 LPA. Placements with average packages were noted around INR 4 LPA for Mechanical Engineering graduates. Skills and industry partnership has focused the college to more than 70% placement in every branch of engineering from time
New Question
a year agoContributor-Level 10
MAH MBA CET, CAT (Common Admission Test), CMAT (Common Management Admission Test), XAT (Xavier Aptitude Test), MAT (Management Aptitude Test), ATMA (AIMS Test for Management Admissions), GMAT (Graduate Management Admission Test) scores are accepted for admission to all MBA courses at Sinhgad College of Engineering. Applicants for intake must, therefore, possess a valid score in any of these tests and hold a recognized Bachelor's degree. Merit selection is used in admitting students, hence the cut scores vary every year depending on the competition and number of applicants. As it is evident from the 2024 intake cycle, for example, the l
New Question
a year agoContributor-Level 10
Yes, you can join Sinhgad College of Engineering (SCOE) for B.Tech without JEE Mains. The college accepts admissions through the Maharashtra Direct Second-Year Engineering Admissions (DSE) process, which is based on your Class 12 marks in relevant subjects (Physics, Chemistry, and Mathematics).
In addition, for students from other states or those who did not appear for JEE, SCOE also has a management quota. Admission under this quota typically requires a minimum score in the qualifying examinations.
New Question
a year agoContributor-Level 6
The cost of attending Sinhgad College of Engineering (SCOE) is generally considered moderate compared to other private engineering colleges in India. The tuition fees for M.Tech programs typically range from INR 1 Lacs to 1.5 Lacs per year, depending on the specialization
New Question
a year agoContributor-Level 10
Among the best engineering colleges in Pune, Sinhagad College of Engineering ranks well but is not at the very top. As per India Today and NIRF rankings, the highest ranking of all the engineering colleges in Pune belongs to the College of Engineering, Pune, followed by institutes such as MIT World Peace University and Vishwakarma Institute of Technology. Sinhagad College of Engineering is ranked at about the 10th rank in Pune and 109th nationally according to NIRF rankings. Yet, it provides a diversity of undergraduate and postgraduate programs and has developed quite a good track record in terms of placements; however, it has to comp
New Question
a year agoContributor-Level 10
Sinhgad College of Engeneering cutoff list are already out and that are as it
SKN Sinhgad Institute of Technology and Science MHT CET Cutoff 2024
Course Cutoff Scores:
| Course | Round 1 Closing Score | Last Round Closing Score |
|---|---|---|
| B.E. in Computer Engineering | 82.78 | 80.97 |
| B.E. in Information Technology | 80.79 | 77.17 |
| B.E. in Mechanical Engineering | 50.86 | 59.89 |
Computer Engineering has the highest competition, while Mechanical Engineering and Information Technology have lower demand.
New Question
a year agoGuide-Level 15
The latest Cut Off Details For M.Tech admissions for the year 2024 in Sinhgad College of Engineering reports that the closing ranks have a cut off which varies based on specializations. For instance, M.E. in Structural Engineering is at around 11.8; M.E. in Environmental Engineering is at around 14.95 while in M.E. in VLSI Design and Embedded Systems the cut off stands at around 4.32. These cutoffs seem to be a reflection of competition in admission through GATE scores and Maharashtra CET for M.Tech programs, hence the student has to perform well in those exams to grab a seat.
New Question
a year agoContributor-Level 10
Qualifying cutoff marks for M.Tech Sinhgad College of Engineering Admission:
The Cut-off scores of the current last round 3 results are different for every stream and also categories. The cutoff marks for specific specializations in M.E offered by the Sinhgad College of Engineering are as follows: Environmental engineering M.E: Generally, a general Home State quota cut-off mark was 14.95; M. E. in Structural engineering: generally 11.8. These marks represent scores at the minimum admission level. The number of marks obtained also shows the intensity of competition in various courses.
New Question
a year agoContributor-Level 10
Sinhgad College of Engineering's 2024 JEE Main cutoff has been mentioned below:
Course Cutoff Scores:
| Course | Round 1 Closing Score | Last Round Closing Score |
|---|---|---|
| B.E. in Computer Engineering | 82.78 | 80.97 |
| B.E. in Information Technology | 80.79 | 77.17 |
| B.E. in Mechanical Engineering | 50.86 | 59.89 |
Computer Engineering has the highest competition, while Mechanical Engineering and Information Technology have lower demand.
New Question
a year agoContributor-Level 6
Sinhgad College of Engineering is generally considered a Tier 2 institution. It is well-regarded in Maharashtra and has good infrastructure and faculty, but it may not have the same level of national recognition or research output as Tier 1 colleges, which typically include institutes like the Indian Institutes of Technology (IITs) and National Institutes of Technology (NITs). Tier 2 colleges like Sinhgad offer quality education and opportunities for students, but they usually have a more regional focus.
New Question
a year agoContributor-Level 10
New Question
a year agoContributor-Level 10
Yes, Sinhgad College of Engineering does have a fee refund policy. Typically, the refund process is applicable under certain conditions, such as withdrawal from the course before a specified date. The exact refund amount and conditions can vary, so it's advisable to check the official website or contact the college's administration for detailed information on their fee refund policy.
New Question
a year agoContributor-Level 6
The entrance exams accepted by Sinhgad College of Engineering for admission to M.Tech. are: GATE and MHTCET MTech.
The Graduate Aptitude Test in Engineering (GATE) is the most common entrance exam for M.Tech. admissions. Many engineering colleges in India accept GATE scores.
Some other admission criteria for M.Tech. at Sinhgad College of Engineering include:
Being an Indian citizen
Having a valid GATE score for the current academic year
For sponsored candidates, having at least two years of full-time work experience in a relevant field
New Question
a year agoContributor-Level 10
Sinhgad College of Engineering (SCOE) is a good place to choose when it comes to pursuing M.Tech and many related factors. It offers specializations in several fields like Mechanical, VLSI & Embedded Systems, Environmental, and many other streams. With this curricula designed for theoretical knowledge combined with practical skills, the students are aptly prepared well for the specific demands of the industry. SCOE also has good experience with faculty and high focus on research and innovation. Besides, the college has a decent placement record too. Many students do get placements in good companies after completion of their graduation.
New Question
a year agoContributor-Level 10
Admission to Sinhgat College of Engineering is offered based on merit and entrance. Candidates must secure a minimum aggregate in Class 12 for UG level admissions. Whereas, for PG level admissions, candidates must secure a minimum aggregate in graduation. In addition to this, candidates must secure valid scores in accepted entrance exams (if any).
New Question
a year agoContributor-Level 6
The eligibility criteria for the M.Tech. programme at Sinhgad College of Engineering generally include:
Educational Qualification: Candidates must hold a Bachelor's degree in Engineering or Technology (B.E./B.Tech.) in the relevant discipline from a recognised university.
Minimum Marks: A minimum aggregate score of around 50-55% is usually required, though this may vary based on specific programme requirements and candidate categories
New Question
a year agoContributor-Level 10
Sinhgad College of Engineering is a good place to choose when it comes to pursuing M.Tech and many related factors. It offers specializations in several fields like Mechanical, VLSI & Embedded Systems, Environmental, and many other streams. With this curriculum designed for theoretical knowledge combined with practical skills, the students are aptly prepared well for the specific demands of the industry. SCOE also has good experience with faculty and a high focus on research and innovation. Besides, the college has a decent placement record too. Many students do get placements in good companies after completion of their graduation. Thi
New Question
a year agoContributor-Level 10
It consist of many college and they have their own specification.I wanna to mentioned one of them which are as
Sinhgad College of Engineering offers a variety of undergraduate and postgraduate courses, primarily in engineering disciplines. The main courses include:
Undergraduate Programs:
- B.E. in Computer Engineering
- B.E. in Information Technology
- B.E. in Mechanical Engineering
- B.E. in Civil Engineering
- B.E. in Electronics and Telecommunication Engineering
- B.E. in Electrical Engineering
Postgraduate Programs:
- M.E. in various specializations
For the full list and details, you may want to visit their official website
Register to get relevant
Questions & Discussions on your feed
Ask & Answer
Panel of Experts