Ask & Answer: India's Largest Education Community

This implies that you will constantly have access to fresh employment and research-related opportunities.

• You will acquire several highly sought-after talents that companies will be looking for by taking Advertising courses.
• The world of advertising continues to expand. For instance, the introduction of online techniques completely altered the way this industry looked.
• Advertising has a significant impact on people's daily lives because it not only raises public awareness but also helps consumers modify their behavior.
• Advertising is a subject of creativity and commitment. If candidates possess them, they can opt for an Advertising course.
• An individual who has a knack for creativity, fine art, and new ideas can apply for this course.

Base area of the cork = A

Height of the cork = h

Density of the liquid = ${\rho }_l$

Density of the cork = $\rho$

In equilibrium, Weight of the cork = Weight of the liquid displaced by the floating cork

Let the cork be depressed slightly by an amount x, as a result, some extra water of a certain volume is displaced. Hence, an extra up-thrust acts upward and provides restoring force to the cork.

Up-thrust (Restoring force) = weight of the extra water displaced

F = mg = ${\rho }_{l}Vg$

Volume = Area $\times$ distance through which the cork is depressed

V = Ax

F = A ${\rho }_{l}gx$ ….(i)

According to force law, F= kx, where k is constant

k = $\frac{F}{x}$ = A ${\rho }_{l}g$ …(ii)

Time period of the oscillation of the cork, T = 2 $\pi \sqrt{\frac{m}{k}}$ ….(iii)

Where m = mass of the cork = Base area of the cork $\times \mathrm{h}\mathrm{e}\mathrm{i}\mathrm{g}\mathrm{h}\mathrm{t}\mathrm{}\mathrm{o}\mathrm{f}\mathrm{}\mathrm{t}\mathrm{h}\mathrm{e}\mathrm{}\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{k}\mathrm{}\times \mathrm{d}\mathrm{e}\mathrm{n}\mathrm{s}\mathrm{i}\mathrm{t}\mathrm{y}$

m = Ah $\rho$

So T = 2 $\pi \sqrt{\frac{\mathrm{A}\mathrm{h}\rho }{\mathrm{A}{\rho }_{l}g\mathrm{}}}$ = 2 $\pi \sqrt{\frac{\mathrm{h}\rho }{{\rho }_{l}g}}$

(a) The time period of a simple pendulum, T = 2 $\pi \sqrt{\frac{m}{k}}$

For a simple pendulum, k is expressed in terms of mass, m as : k $\propto m$ or $\frac{m}{k}$ = constant

Hence, the time period of a simple pendulum is independent of the mass of the bob. In the case of a simple pendulum, the restoring force acting on bob is given as F = -mg $\sin ?\theta$ , where

F = restoring force

m = mass of the bob

g = acceleration due to gravity

$\theta =\mathrm{a}\mathrm{n}\mathrm{g}\mathrm{l}\mathrm{e}\mathrm{}\mathrm{o}\mathrm{f}\mathrm{}\mathrm{d}\mathrm{i}\mathrm{s}\mathrm{p}\mathrm{l}\mathrm{a}\mathrm{c}\mathrm{e}\mathrm{m}\mathrm{e}\mathrm{n}\mathrm{t}$

(b) For small $\theta ,$ sin $\theta$ $~\theta$ . For larger $\theta ,$ sin $\theta$ is greater than $\theta$ . This decreases the effective value of g.

Hence the time period increase as : T = 2 $\pi \sqrt{\frac{l}{g}}$ , where l is the length of the simple pendulum.

(c) The time shown by the wristwatch of a man falling from the top of the tower is not affected by the fall. Wrist watch works on spring action, independent of acceleration due to gravity.

(d) During free fall under gravity, the acceleration is zero. Hence the frequency of oscillation of this simple pendulum is zero.

An extensive study of the principles, design, marketing, communication, tactics, and planning of advertising is covered in the Advertising course. Marketing is a way to communicate with an audience about the various goods and services you provide, and it works to get people to buy or use your products by persuading them to do so.

Several businesses and product companies employ advertising methods to boost their product sales and make money when customers use their products. It guarantees that different industries are competitive. With a bachelor's degree in advertising and any associated topics, as well as a master's degree in advertising or a similar area, one can pursue a career in advertising.

(a) For figure (a) : When a force F is applied to the free end of the spring, an extension l is produced. For the maximum extension, it can be written as:

F – kl, where k is the spring constant.

For maximum =extension of the spring, l = $\frac{F}{k}$

For figure (b): The displacement (x) produced in this case is x = $\frac{1}{2}$

Net force F = +2kx = 2k $\frac{1}{2}$ . So l = $\frac{F}{k}$

(b) For figure (a) : For mass (m) of the block, force is written as : F = ma = m $\frac{d^{2}x}{d{t}^2}$ ,

where x is the displacement of the block in time t, then

m $\frac{d^{2}x}{d{t}^2}=-kx$ , it is negative because the direction of the elastic force is opposite to the direction of displacement.

$\frac{d^{2}x}{d{t}^2}=-\left(\frac{k}{m}\right)x$ = ${-\omega }^2$ xwhere, ${\omega }^2$ = $\frac{k}{m}$ , $\omega \mathrm{i}\mathrm{s}\mathrm{}\mathrm{a}\mathrm{n}\mathrm{g}\mathrm{u}\mathrm{l}\mathrm{a}\mathrm{r}\mathrm{}\mathrm{f}\mathrm{r}\mathrm{e}\mathrm{q}\mathrm{u}\mathrm{e}\mathrm{n}\mathrm{c}\mathrm{y}\mathrm{}\mathrm{o}\mathrm{f}\mathrm{}\mathrm{t}\mathrm{h}\mathrm{e}\mathrm{}\mathrm{o}\mathrm{s}\mathrm{c}\mathrm{i}\mathrm{l}\mathrm{l}\mathrm{a}\mathrm{t}\mathrm{i}\mathrm{o}\mathrm{n}.$

Time period of the oscillation, T = $\frac{2\pi }{\omega }$ = $\frac{2\pi }{\surd \frac{k}{m}}$ = 2 $\pi \sqrt{\frac{m}{k}}$

For figure (b) :

F = m $\frac{d^{2}x}{d{t}^2}$ = -2kx. It is negative because the direction of elastic force is opposite to the direction of displacement.

$\frac{d^{2}x}{d{t}^2}=-\left[\frac{2kx}{m}\right]x$ = - ${\omega }^2$ x, where angular frequency $\omega$ = $\sqrt{\frac{2k}{m}}$

Time period, T = $\frac{2\pi }{\omega }=2\pi \sqrt{\frac{m}{2k}}$

(a) X = -2 sin( 3t + $\frac{\pi }{3}$ ) = +2cos ( 3t + $\frac{\pi }{3}$ + $\frac{\pi }{2})$ = 2 cos (3t + $\frac{5\pi }{6}$ )

when we compare this equation with standard SHM equation

x = Acos ( $\omega$ t + $\phi$ ), then we get

Amplitude A = 2 cm. Phase angle $\phi =\frac{5\pi }{6}$ = 150 $°$ , angular velocity $\omega$ = 3 rad/s

(b) X= cos ( $\frac{\pi }{6}-$ t) = cos ( $t-\frac{\pi }{6}$ )

when we compare this equation with standard SHM equation

x = Acos( $\omega$ t + $\phi$ ), then we get

Amplitude A = 1 cm. Phase angle $\phi =-\frac{\pi }{6}$ = - 30 $°$ , angular velocity $\omega$ = 1 rad/s

(c) X = 3sin (2 $\pi$ t + $\frac{\pi }{4}$ ) = -3cos $\left[\left(2\pi \mathrm{t}\mathrm{}+\mathrm{}\frac{\pi }{4}\right)+\mathrm{}\frac{\mathrm{\pi }}{2}\right]=-3\mathrm{c}\mathrm{o}\mathrm{s}?(2\pi \mathrm{t}+\mathrm{}\frac{3\pi }{4})$

when we compare this equation with standard SHM equation

x = Acos( $\omega$ t + $\phi$ ), then we get

Amplitude A = 3 cm. Phase angle $\phi =\frac{3\pi }{4}$ = 135 $°$ , angular velocity $\omega$ = $2\pi$ rad/s

(d) X = 2cos $\pi$ t

when we compare this equation with standard SHM equation

x = Acos( $\omega$ t + $\phi$ ), then we get

Amplitude A = 2 cm. Phase angle $\phi =0°$ , angular velocity $\omega$ = $\pi$ rad/s

(a) Time period, T = 2 s, Amplitude A = 3 cm

At time, t = 0, the radius vector makes an angle $\frac{\pi }{2}$ with the positive x-axis, i.e. phase angle $\phi$ = + $\frac{\pi }{2}$

Therefore, the equation of simple harmonic motion for the x-projection of the radius vector, at time t is given by the displacement equation:

x = Acos $\left. [\frac{2\pi t}{T}+\phi \right]$ = 3cos $\left. [\frac{2\pi t}{2}+\frac{\pi }{2}\right]$ = -3sin ( $\frac{2\pi t}{2}$ ) = -3sin $\pi t$ cm

(b) Time period, T = 4 s, Amplitude A = 2 m

At time, t = 0, the radius vector makes an angle $\pi$ with the positive x-axis, i.e. phase angle $\phi$ = + $\pi$

Therefore, the equation of simple harmonic motion for the x-projection of the radius vector, at time t is given by the displacement equation:

x = Acos $\left. [\frac{2\pi t}{T}+\phi \right]$ = 2cos $\left. [\frac{2\pi t}{4}+\pi \right]$ = -2cos ( $\frac{\pi }{2}t)$ m

The functions have the same frequency and amplitude, but different initial phases.

Distance travelled by the mass sideways, A = 2.0 cm

Force constant of the spring, k = 1200 N/m and mass, m = 3 kg

Angular frequency,  $\omega =\sqrt{\frac{k}{m}}$ = $\sqrt{\frac{1200}{3}}$ = 20 rad/s

(a) When mass is at the mean position, displacement x = Asin $\omega t=2sin20t$ cm

(b) At the maximum stretched position, the mass is towards extreme right. Hence the initial phase is $\frac{\pi }{2}$

x = A sin ( $\omega t+\frac{\pi }{2})$ = 2sin (20t + $\frac{\pi }{2})$ = 2cos20t

(c) At the maximum compressed position, the mass is towards the extreme left

Hence, the initial phase is $\frac{3\pi }{2}$

x = Asin ( $\omega t+\frac{3\pi }{2})$ = 2 cos20t

Hence, the functions have the same frequency and amplitude, but different initial phases.