A body is moved along a closed loop. Is the work done in moving the body necessarily zero? If not, state the condition under which work done over a closed path is always zero.

2 Views|Posted 8 months ago

Asked by Shiksha User

1 Answer

Sort by:

Answered by

Payal Gupta | Contributor-Level 10

8 months ago

This is a short answer type question as classified in NCERT Exemplar

No, work done is not always zero in circular path it is zero only when all the forces are zero.

Upvote

Similar Questions for you

An object is placed beyond the centre of curvature C of the given concave mirror. If the distance of the object is d₁ from C and the distance of the image formed is d₂ from C, the radius of curvature of this mirror is:

Vishal Baghel

Using Newton’s formula,

$\Rightarrow (f + d_{1}) (f - d_{2}) = f^{2}$

$\Rightarrow f = \frac{d_{1} d_{2}}{d_{1} - d_{2}} \Rightarrow R = \frac{2 d_{1} d_{2}}{d_{1} - d_{2}}$

Two blocks M₁ and M₂ having equal mass are free to move on a horizontal frictionless surface. M₂ is attached to a massless spring as shown in Fig. 6.10. Initially M₂ is at rest and M₁ is moving toward M₂ with speed v and collides head-on with M₂.

(a) While spring is fully compressed all the KE of M₁ is stored as PE of spring.

(b) While spring is fully compressed the system momentum is not conserved, though final momentum is equal to initial momentum.

(c) If spring is massless, the final state of the M₁ is state of rest.

(d) If the surface on which blocks are moving has friction, then collision cannot be elastic.

Payal Gupta

This is a multiple choice answer as classified in NCERT Exemplar

(c) When M1 comes in contact with the spring. M1 is retarded by the spring force and M2 is accelerated by the spring force.

a) So spring will continue compress until the blocks moves with the same velocity.

b) As

A bullet of mass m fired at 30° to the horizontal leaves the barrel of the gun with a velocity v. The bullet hits a soft target at a height h above the ground while it is moving downward and emerges out with half the kinetic energy it had before hitting the target. Which of the following statements are correct in respect of bullet after it emerges out of the target?

(a) The velocity of the bullet will be reduced to half its initial value.

(b) The velocity of the bullet will be more than half of its earlier velocity.

(c) The bullet will continue to move along the same parabolic path.

(d) The bullet will move in a different parabolic path.

(e) The bullet will fall vertically downward after hitting the target.

(f) The internal energy of the particles of the target will increase.

Payal Gupta

This is a multiple choice answer as classified in NCERT Exemplar

(b) conserving energy between “O” ans ”A”

U_i+ K_i= U_f+ K_f

0+1/2mv²= mgh + 1/2mv’

$\frac{{(v')}^{2}}{2} = \frac{v^{2}}{2} = - g h$

(v’)²=v²-2gh = v^’= $\sqrt[]{v^{2} - 2 g h}$ ……….1

Let speed after emerging be v₁then

=1/2mv₁²=1/2[1/2mv’²]

1/2m(v₁)²=1/4m(v’)²=1/4m[v²-2gh]

V₁= $\sqrt[]{\frac{v^{2}}{2} - g h}$ ………….2

From eqn 1 and 2

$\frac{v'}{v_{1}} = \frac{\sqrt[]{v^{2} - 2 g h}}{\sqrt[]{v^{2} - 2 g h / \sqrt[]{2}}} = \sqrt[]{2}$

So v₁ = v’/

A man, of mass m, standing at the bottom of the staircase, of height L climbs it and stands at its top.

(a) Work done by all forces on man is equal to the rise in potential energy mgL.

(b) Work done by all forces on man is zero.

(c) Work done by the gravitational force on man is mgL.

(d) The reaction force from a step does not do work because the point of application of the force does not move while the force exists.

Payal Gupta

This is a multiple choice answer as classified in NCERT Exemplar

(b, d) When a man of mass m climbs up the staircases of height L, work done by the gravitational force on the man is mgl work done by internal muscular forces will be mgL as the change in kinetic is almost zero.

Hence total work done =-

A cricket ball of mass 150 g moving with a speed of 126 km/h hits at the middle of the bat, held firmly at its position by the batsman. The ball moves straight back to the bowler after hitting the bat. Assuming that collision between ball and bat is completely elastic and the two remain in contact for 0.001s, the force that the batsman had to apply to hold the bat firmly at its place would be

(a) 10.5 N

(b) 21 N

(c) 1.05 ×104 N

(d) 2.1 × 104 N

Payal Gupta

This is a multiple choice answer as classified in NCERT Exemplar

Time of contact =0.001s

U=126km/h= $\frac{126 \times 1000}{60 \times 60} = \frac{35 m}{s}$

V= -35m/s

Change in momentum of the ball = m (v-u)= $\frac{3}{20} (- 35 - 35) k g m / s$

=21/2

F= dp/dt=- $\frac{21 / 2}{0.001} N$ = - 1.05 $\times 10^{4} N$

Here – negative sign indicates that force will be opposite to the direction of movement of the ball be

Taking an Exam? Selecting a College?

Get authentic answers from experts, students and alumni that you won't find anywhere else.

On Shiksha, get access to

66K

Colleges

1.2K

Exams

6.9L

Reviews

1.8M

Answers

Learn more about...

Physics NCERT Exemplar Solutions Class 11th Chapter Six 2025

View Exam Details

Share Your College Life Experience

Didn't find the answer you were looking for?

Search from Shiksha's 1 lakh+ Topics

Ask Current Students, Alumni & our Experts

Quick Actions

Community GuidelinesUser Points System

QuestionsDiscussionsTags

Have a question related to your career & education?

See what others like you are asking & answering