Ask & Answer: India's Largest Education Community
All Questions
New Question
11 months agoNew Question
11 months agoContributor-Level 10
The career prospects of pursuing a BTech at Navrachana University depend on the BTech specialisation chosen by the graduates. The university offers four BTech specialisations. Graduates can either seek a job or pursue PG courses like MTech/ MBA after completing their BTech. Some job profiles available for BTech graduates of Navrachana University are tabulated below:
| Engineering Job Profile | Average Annual Salary (in INR) |
|---|---|
| Civil Engineer | 4.6 LPA |
| Electrical Engineer | 4.4 LPA |
| Electronics Engineer | 3.4 LPA |
| Mechanical Engineer | 4.3 LPA |
Note:- The salaries have been taken from the external sources, and hence may vary.
New Question
11 months agoContributor-Level 10
Yes, the BSc admission process for 2025 at Nagaland University – Medziphema Campus is currently open. Students are advised to check the official website for detailed schedules and application guidelines.
New Question
11 months agoContributor-Level 10
Cluster University MBA comparison can be done based on certain parameters. These shall help in carrying out comparison in a fair manner. Aspirants can compare their preferred colleges based on the below-mentioned parameters:
- Fees
- Placements
- Faculty
- Location
- Facilities, etc.
New Question
11 months ago
Contributor-Level 10
The IES University average package offered during the 2024 placement drive is yet to be released. However, the University has released the highest package offered in 2024 on its official website, which stood at INR 21 LPA.
New Question
11 months agoContributor-Level 10
Nickel is refined by Mond's process. In this process, nickel is heated in the presence of carbon monoxide to form nickel tetracarbonyl, which is a volatile complex.

New Question
11 months agoContributor-Level 10
7.52
Oxygen is smaller in size as compared to sulphur. Due to its smaller size, it can effectively form p – p bonds and form O2 [O = O] molecule. Also, the intermolecular forces in oxygen are weak van there Wall’s, which cause it to exist as a gas.
On the other hand, sulphur does not form M2 molecule but exists as a puckered structure held together by strong covalent bonds. Hence, it is a solid.
New Question
11 months agoNew Question
11 months agoContributor-Level 10
The components selected for the stationary phase should have different solubility's in the phase, only then it is selected as the stationary phase. Hence, different components have different rates of movement through the stationary phase; as a result, can be separated from each other.
New Question
11 months agoContributor-Level 6
No, you cannot join CII Institute of Hospitality, Bangalore directly. Admission is based on the in-house entrance test, CII Aptitude Test, followed by an Industry-panel Viva. The candidates must meet the eligibility criteria set by the institution. Interested candidates can apply online on the official website for the desired course.
New Question
11 months agoContributor-Level 10
Chromatography is a term used for numerous laboratory techniques for the separation of mixtures. The term is derived from Greek word 'chroma' meaning 'color' and 'graphein' meaning 'to write'. Chromatographic techniques are based on the principles that different components are adsorbed differently on an adsorbent. There are various chromatographic techniques used such as paper chromatography, column chromatography, gas chromatography, etc.
New Question
11 months agoContributor-Level 10
7.51
The elements of group 16 are collectively called chalcogens.
[i]. Elements of group 16 have six valence electrons each. The general electronic configuration of these elements is ns2 np4, where n varies from 2 to 6.
[ii]. Oxidation state: As these elements have six valence electrons [ns2np4], they should display an oxidation state of -2. However, only oxygen predominantly shows the oxidation state of -2 owing to its high Electronegativity. It also exhibits the oxidation state of -1 [H2O2], zero [O2], and +2 [OF2].
However, the stability of the -2 oxidation state decreases on moving down a group due to a decrease in the El
New Question
11 months agoContributor-Level 10
BDes Animation course generally continues for a duration of 4 years, which is divided into 6 to 8 semesters in most government and private colleges of India.
The B des Animation course syllabus' main topics include Fundamentals, Drawing, Computer Graphics, Digital Imaging, Storyboarding, 2D animation, 3D animation, Game Design, and others.
The course syllabus for BDes Animation course might slightly vary for different colleges in India based on their individual course curriculum and duration.
Students can check the complete details about BDes Animation course from the below link:
New Question
11 months agoGuide-Level 15
Chettinad Institute of Technology offers a four-year BTech programme in full-time mode. The course is divided into eight semesters. Candidates after completing Class 12 can apply for any of the below-mentioned BTech specialisations:
- Computer Science
- Information Technology
- Medical
- Electronics & Communication
- Artificial Intelligence & Data Science
- Cyber Security
New Question
11 months agoContributor-Level 10
Yes, Navrachana University graduates can choose among various career opportunities after BTech. These opportunities include the private-sector as well as the government-sector jobs. Jobs in the government sector are populary sought-after as they offer lucrative incentives and job security. Some common government job options for BTech graduates of the university are presented in the table below:
| Industry | Average CTC |
|---|---|
| Public Sector Undertaking Jobs | INR 10 - 12 LPA |
| Indian Engineering Services | INR 8 - 12 LPA |
| Research Organisations | INR 6 - 9 LPA |
| Public Works Department and Defence Services | INR 8 - 10 LPA |
New Question
11 months agoNew Question
11 months agoContributor-Level 10
During the roasting of pyrite ore, a mixture of FeO and Cu2O is obtained.
2 CuFeS2 + O2→ Cu2S + 2 FeS + SO2
2 Cu2S + 3 O2 → 2 Cu2O + 2 SO2
2 FeS + 3 O2 → 2 FeO + 2 SO2
The role of silica in the metallurgy of copper is to remove the iron oxide obtained during the process of roasting as ‘slag’. If the sulphide ore of copper iron, then silica (SiO2) is added as a flux before roasting. Then, FeO combines with silica to form silicate, FeSiO3 (slag).
FeO + SiO2→ FeSiO3 (slag)
New Question
11 months agoContributor-Level 10
7.50
Phosphorous Pentachloride [PCl5] cannot act as reducing agent because in the PCl5, the oxidation state of chlorine is +5 and it is not possible for Chlorine to increase its oxidation state beyond +5 but it can very easily act as an oxidizing agent because it can easily reduce its oxidation state from +5 to +3.
New Question
11 months agoContributor-Level 10
The steps involved in the extraction of zinc from zinc blende (ZnS) are as followed:-
- Concentration: the ore is crushed and then concentrated by froth floatation
- Roasting: the concentrated ore is heated in the presence of an excess of air at about 1200K to form zinc
- ZnS + 3 O2 → 2 ZnO + 2 SO2
- Reduction: ZnO obtained above is mixed with powdered coke and heated to 1673K in a fireclay
- ZnO + C → Zn + CO
- Electrolytic Refining: Zinc is refined by the process of electrolytic refining. In this process, impure zinc is made the anode and a pure copper strip is made the cathode. The electrode used in an acidified solution of zinc sulphate (Z
New Question
11 months agoGuide-Level 15
Yes, Chettinad Institute of Technology applications are currently open for 2026 session. The institute has not released any deadline for now and aspirants can apply as per their convinence. However, candidates must apply as soon as possible to avoid missing out the chance. Candidates can fill out the application form on the institute's website.
Register to get relevant
Questions & Discussions on your feed
Ask & Answer
Panel of Experts
