Ask & Answer: India's Largest Education Community

Hi Pradipta,
Food Technology:
Food Technology is a science which deals with the techniques and principles involved in processing and preserving the food substances.
The modern food processing techniques is the key to flourishing supermarkets we have today. Extra nutrients can be added while processing the food and processed food is less susceptible to spoilage.
Some of the specialised courses are:
Bachelor of Science in Food Technology
Bachelor of Science in Food Science
Bachelor of Science in Food and Nutrition
Bachelor of Science in Food Preservation
Bachelor of Technology in Food Engineering
Bachelor of Science (after Bachelor of Science.) in Food Technology
For admission into an undergraduate course in Food Technology/ Food Science, a candidate should have passed 10+2 pass in science stream from recognized Board examination.
Specialization:
Dairy
Sugar
Alcohol
Bakery and confectionery items
Oil and oil seed processing
Fruits and vegetables
There are plenty of job opportunities for food technologists in the country. At initial stage for a graduation salary package may vary from Rs 8,000 to Rs.12,000 per month.With work experience salary is expected to raise to Rs.15,000 to Rs.25,000 per month.
Here is the list of institute offering M. Sc. (Food Technology):
Guru Jambheshwar University of Science and Technology, Hisar
Punjab Agricultural University, Ludhiana
Chhatrapati Sahu Ji Maharaj University, Kanpur
BFIT Institute of Science & Research, Dehradun
Gandhi Institute of Technology and Management (GITAM) University, Visakhapatnam
Refer to the below link to know about more institutes offering M. Sc. (Food Technology):
https://www.shiksha.com/search/index?keyword=M.Sc+food+technology&start=0&institute_rows=-1&content_rows=-1&country_id=&city_id=&zone_id=&locality_id=&course_level=&course_type=&min_duration=&max_duration=&search_type=&search_data_type=&sort_type=&utm_campaign=site_search&utm_medium=internal&utm_source=shiksha&cpgs_param=56_Institutes&from_page=search_page_top&autosuggestor_suggestion_shown=-1
Refine the search as per your city preference.
Hope this helps.
Thanks
All The Best

Shruti, Design is a field that is age old and has been evolving every year like science. Sometimes student Artists are too much enamoured by Fine Arts preventing them to look objectively at Design. They must read this http://bit.ly/SXc9GD. Again like science it pays to be at the cutting edge. For e.g. science students do better if they go for CS or IT since that are areas where development is taking place rapidly. Similarly in Design the cutting edge areas are UID/ UXD, 3D Printing, Immersive Technology, Augmented Reality, 3D Projection etc, besides of course Game Design and Animation. At this stage, you may want to understand the creative world and the careers it offers. There are many careers for the creative/ artistic people. Interiors, textile as well as Web Design rely on the same skills - your layout skills and color sense. Journalism also is at this level and relies on your language skills and knowledge of history and current affairs. A little higher perches Graphic Design, Fashion Design, jewellery design, Acting, and Fine Arts which rely on one of your artistic skills - sketching and imagination. At a similar level perches VFX as well as Motion Graphics which rely on one of your artistic skills - Cinematographic skills and imagination. Then come careers like Animation, Film Making, Game Design which rely on multiple talents like your authority over sketching, acting, direction, voice, sound, writing, storytelling and problem solving skills etc. Any extra skill can be used in this. So it turns out to be one of the most challenging as well as satisfying careers. Sure not recommended for the weak hearted. Do remember that digital design careers (e.g. web design, graphics, UI design, animation, vfx, multimedia) give better profits since they can be delivered anywhere in the world and hence may earn in dollars - resulting in better rewards for designers. You may also like to read this about the kind of preparation the best students put into design http://bit.ly/1ddUSi8. Wish you the best for your career. Remember, your Career is a resultant of your knowledge combined with your passion and expression ability. If you like this answer you may select it as best answer or press like.

Hi Feroz,
Below is the basic eligibility for pursuing M.Tech in Automobile Engineering:
Aspirant must have passed B.E/B.Tech or equivalent in Automobile/Mechanical Engineering or in relevant discipline with minimum 50% marks.
As eligibility criteria and admission procedure may vary in different institutes as each institute have their own admission procedure and policies.
List of entrance exam for M.Tech in Automobile Engineering:
Bharath University M.Tech entrance exam
Graduate Aptitude Test in Engineering (GATE)
JNTU M.Tech Entrance Exam
Noorul Islam University M.Tech Entrance Exam
TANCET
Vellore Institute of Technology Engineering Entrance Exam
Admission to IIT are done on the basis of GATE score.
Some of the certification courses:
Auto CAD
Piping - Stress Analysis
PATENT CLAIMS DRAFTING
Computer Aided Manufacture
Tool Design
CNC Machining
Here is the list of institutes offering M.Tech in Automobile Engineering:
Veermata Jijabai Technological Institute, Mumbai
Hindustan University, Chennai
K. R. Mangalam University, Gurgaon
Indian Institute of Technology, Delhi
ITM University, Gurgaon
Amity School of Engineering and Technology, Noida
PES University, Bangalore
Faculty Council of Engineering & Technology (Jadavpur University), Kolkata
Anna University, Chennai
National Education Management, Mumbai
Refer to the below link to know about more institutes offering M.Tech in Automobile Engineering:
https://engineering.shiksha.com/me-mtech-in-automobile-engineering-in-india-categorypage-2-59-336-0-0-1-1-2-0-none-1-0#cateSearchBlock
Refine the search as per your state preference.
Hope this helps,
If you like this answer rate it as the best answer.
Thanks.
All the best!

Hi Pratap,
Before seeking admission in any institute, kindly check the below mentioned parameters such as affiliation, accreditation, fee structure, curriculum etc.
I can totally understand your dilemma in this case as I have been through the same.
Now, you need understand that there are two important things to consider while seeking admission.
(i) A branch of your choice but from a not so good institute = Not much value.
(ii) A not so demanding engineering branch from a good institute= Not much value either.
However, if you are planning to take admission, it is always advisable to keep in mind the various parameters before selecting any institute.
- Recognition
- Success Rate
- How old the institute is
- Course details
- Faculty
- Infrastructure
- Alumni/Student Feedback
- Fees
You may contact the institute officials personally for specific information before joining the institute.
Regarding placements, every college / institute provide assistance to successfully pass out students. But, no institute can guarantee you placement as it entirely depends on your capabilities, utilization of skills, presence of mind, communication skills, etc.
Refer to the below link to visit the official website:
http://www.aviationinstitute.co.nz/ai/index.php/school-of-engineering/pre-employment-training/easa-b1-1-and-b2-basic-aircraft-maintenance-courses-international/
Hope this helps,
If you like this answer rate it as the best answer.
Thanks.
All the best!

Hi Pratap,
Aircraft Maintenance Engineering (AME) is slightly different from Aeronautical or Aerospace Engineering. Aeronautical engineers specialise for the field at the B.Tech level and are involved in designing and manufacturing of aircrafts while Aircraft Maintenance Engineers service the aircraft and keep it in perfect flying condition.
Eligibility
Candidates who want to pursue Aircraft Maintenance Engineering course should have completed 10+2 with at least 50 per cent marks in Physics, Chemistry and Mathematics. There is an upper age limit of 23 years to enter the programme. Upper age limit may be relaxed for those who have done three-year diploma course in engineering (in any stream) or B.Sc. after 10+2 with Physics, Chemistry and Math.
Though eligibility criteria may differ in various institutes as each institutes have their own policy and procedure for admission to various programs.
After the successful completion of AME course you can appear and qualify for AMAeSI (Associate Membership of Aeronautical Society of India) which is fully recognized by Government of India/ State Government/ Union Public Service Commission/ GATE for MTech admission/ Hindustan Aeronautics Ltd/ Indian Airlines/ Air India/ BHEL/ DRDO/ NAL/ IAF/ Coast Guard/ Airline Industries/ Birla Institute of Technology, Ranchi/ Madras Institute of Technology as equivalent to BE/ BTech (Aeronautical Engineering). It will help you in getting jobs in different airline Industries.
Here is the list of institutes offering Aircraft Maintenance Engineering in Uttar Pradesh:
Mewar University- Faculty of Aeronautics
Avalon Academy
Shree Jwalajee Institute of Aeronautical Engineering
Avalon Academy
College of Aeronautical Engineering and Technology
Avalon Academy
Refer to the below link to know about more institutes offering Aircraft Maintenance Engineering in Uttar Pradesh:
https://engineering.shiksha.com/aircraft-maintenance-engineering-colleges-in-uttar-pradesh-categorypage-2-61-1-0-0-1-126-2-0-none-1-0
Refine the search as per your state preference.
Hope this helps,
If you like this answer rate it as the best answer.
Thanks.
All the best!

Unfortunately career choices if made on such assumptions and thoughts is risky and you will be sure of being unsuccessful. Please understand that you need to choose a career based on your real liking and not on the scope or future or what you see. If you love costing, you will definitely get successful. CS and CWA are two different careers and cannot be compared in any aspect. I would strongly request you to decide your career based on your competence. Liking just theory subjects, does not mean you can do CS, since CS also includes lots of maths and accountancy, taxation, which you have to pass to be a qualified CS. Same with CWA. Competition is everywhere and there is no less or more competition in careers. Rgds, Dr. Anand Wadadekar, Founder Director Discovering Careers India. www.facebook.com/ discoveringcareers