Ask & Answer: India's Largest Education Community

The job of a pilot is a highly specialised one. It requires knowledge of air navigation, interpretation of meteorological reports, operating sophisticated electronic and mechanical controls, leading the aircraft under adverse circumstances, and being a leader to the flight crew and passengers under climatic and other emergency situations.
In addition, a type rating is required for particular aircraft over 12,500 pounds, or aircraft that are turbojet-powered. Further endorsements are required for high-performance (more than 200 horsepower), complex (retractable landing gear, flaps, and a controllable-pitch propeller), or tailwheel-equipped aircraft, as well as for high-altitude operations.
Most private pilot certificates are issued as "private pilot: airplane single-engine land," which means the pilot may fly any single-engine, land-based airplane they are qualified in. A pilot is only qualified in the category and class of aircraft in which they successfully complete their checkride (for example, a pilot who takes a commercial pilot checkride in a multi-engine, land-based aircraft and passes, may only exercise the privileges of a commercial pilot in multi-engine, land-based aircraft; the pilot may not exercise the privileges of a commercial pilot in single-engine or sea-based aircraft without passing the appropriate parts of a checkride in those particular categories of aircraft).
You will be responsible for the passengers, the crew and the aircraft. Hence you must have discipline, patience, responsibility, punctuality, commitment and self-confidence.
At IGIA the aspiring pilots can expect to receive the best guidance for the pilot's License Conversion Examination conducted by DGCA, Govt. of India, at the lowest possible cost with the advantage of being taught by the professionals holding the licenses from DGCA who readily share their experiences with the students that enriches them and come handy in their overall performance.

To become a commercial pilot:
You need to first possess a student pilot license. You must be over 17 years of age and have completed class 12th with science (Physics and mathematics) with 50%.
Your vision in one eye must be perfect. In general medical terminology, it is called 6/6 eyesight. In the other eye, you could have an imperfection of 6/9, which must be correctable to 6/6.
General physical fitness is mandatory. You must be free of any disease that can hamper normal function.
You need to register at a flying club which is recognized by Directorate General of Civil Aviation (DGCA), Government of India.
Next is private pilot license which includes sixty hours of flying. A commercial pilot licence can be obtained only after a PPL and 250 hours of flying.
Some of the institutes offering commercial pilot training are:
1. Academy of Carver Aviation Private Limited Pune.
2. All India Institute of Aeronautics Dehradun.
3. Center for Civil Aviation Training (CCAT) Delhi.
4. Glorietta Aviation Ghaziabad.
5. Fly Wings Aviation Pvt. Ltd. Mumbai.
For more, you can refer to the link mentioned below.
https://hospitality.shiksha.com/commercial-pilot-training-in-india-categorypage-6-87-301-0-0-1-1-2-0-none-1-0#page-top

SAP is the worlds largest selling Enterprise Resources Planning (ERP) software system. For implementation of SAP you require ABAB developers and functional consultants. If you want to make career in Technical then you may learn ABAB and do certifications. In case you want to be a functional specialist, you can do one of more functional module certification. SAP professionals are paid above normal developers and Business Analysts. With SAP certifications you can join IT companies or IT department of business enterprises.
Based on your experience in QC it is suggested that you evaluate doing following modules SAP QM or SAP PP or SAP MM module where you can use your experience to become functional consultant.
(a) SAP QM ( Quality Management ) is a functional module to improve the quality of goods.This module deals with Quality Planning, Execution, Inspections, Quality Control and Quality Certificates.
(b) SAP PP is one the important module inSAP system. It handles all business process related to production of a company. InSAP R/3 system modular data is classified as master data and transaction data where the master data is defined as the individual module objects.
(c) SAP MM (Material Management) is a functional module that t is used for Procurement Handling and Inventory Management. SAP MM is one the largest functional module in SAP. This module mainly deals with the Procurement Process, Master Data (Material & Vendor Master), Inventory Management, Valuation of Material & Account Determination, Material Requirement Planning, Invoice Verification etc. SAP MM is integrated with other modules such as SD, PP and QM. Materials management is used for procurement and inventory management.
You can begin with SAP QM and then move to SAP PP.