Ask & Answer Question

Physics NCERT Exemplar Solutions Class 12th Chapter Fourteen Physics Class 12th Semiconductor Electronics

Three photo diodes D₁, D₂and D₃ are made of semiconductors having band gaps of 2.5 eV, 2 eV and 3 eV, respectively. Which ones will be able to detect light of wavelength 6000 Å ?

2 Views | Posted 4 months ago

Asked by Shiksha User

1 Answer

Answered by

alok kumar singh | Contributor-Level 10

4 months ago

This is a Short Answer Type Questions as classified in NCERT Exemplar

Explanation- E=hc/ $λ$ = $\frac{6.6 \times 10^{- 34} \times 3 \times 10^{8}}{6000 \times 10^{- 10} \times 1.6 \times 10^{- 19}}$ = 2.06eV

The incident radiation which is detected by the photodiode having energy should be greater

Than the band-gap. So, it is only valid for diode D2.Then, diode D2 will detect this radiation.

0 Upvotes 0 Downvotes

Similar Questions for you

Two 10cm log, straight wires, each carrying a current of 5A are kept parallel to each other. If each wire experienced a force of 10^-5N, then separation between the wires is__________cm.

Vishal Baghel

$F = \frac{μ_{0} \times 2}{4 π} \frac{i_{1} i_{2}}{d} l$

$1 0^{- 5} = \frac{1 0^{- 7} \times 2 \times 5 \times 5}{d} = \frac{10}{100}$

$d = 5 \times 1 0^{- 2} m$

d = 5 cm

The positive feedback is required by an amplifier to act an oscillator. The feedback here means:

Vishal Baghel

A portion of the output power is returned back to the input.

The variation of acceleration due to gravity (g) with distance (r) from the centre of the earth is correctly represented by: (Given R = radius of earth)

Payal Gupta

$g \propto r 0 \leq r \leq R$

$g \propto \frac{1}{r^{2}} r > R$

A transistor is used in an amplifier circuit in common emitter mode. If the best current changes by 100 $μ A,$ it brings a change of 10 mA is collector current. If the load resistance is 2 $k Ω$ and input resistance is 1 $k Ω,$ the value of power gain is x × 10⁴. The value of x is_____________.

alok kumar singh

Power gain = ${(\frac{Δ i_{c}}{Δ i_{b}})}^{2} \times \frac{R_{0}}{R_{i}}$

= ${(\frac{10 \times 1 0^{- 3}}{100 \times 1 0^{- 6}})}^{2} \times \frac{2}{1}$

= 2 × 104 = x × 104

= 2

The typical transfer characteristics of a transistor in CE configuration is shown in figure. A load resistor of $2 k Ω$ is connected in the collector branch of the circuit used. The input resistance of the transistor is $0.50 k Ω .$ The voltage gain of the transistor is________.

alok kumar singh

Voltage gain = $\frac{Δ l_{C}}{Δ l_{B}} \times \frac{R_{C}}{R_{B}}$

$\frac{5 \times 1 0^{- 3}}{100 \times 1 0^{- 6}} \times \frac{2}{0.5}$

= 200

Get authentic answers from experts, students and alumni that you won't find anywhere else

On Shiksha, get access to

65k Colleges
1.2k Exams
688k Reviews
1800k Answers

Community GuidelinesUser Points System

QuestionsDiscussionsTags

Three photo diodes D₁, D₂and D₃ are made of semiconductors having band gaps of 2.5 eV, 2 eV and 3 eV, respectively. Which ones will be able to detect light of wavelength 6000 Å ?

1 Answer

Similar Questions for you

Learn more about...

Most viewed information

Share Your College Life Experience

Didn't find the answer you were looking for?

Need guidance on career and education? Ask our experts

Your Question

Three photo diodes D1, D2and D3 are made of semiconductors having band gaps of 2.5 eV, 2 eV and 3 eV, respectively. Which ones will be able to detect light of wavelength 6000 Å ?

1 Answer

Similar Questions for you

Learn more about...

Most viewed information

Share Your College Life Experience

Didn't find the answer you were looking for?

Need guidance on career and education? Ask our experts

Your Question

Three photo diodes D₁, D₂and D₃ are made of semiconductors having band gaps of 2.5 eV, 2 eV and 3 eV, respectively. Which ones will be able to detect light of wavelength 6000 Å ?