Ask & Answer: India's Largest Education Community

Hi Rahul,
An embedded system is a computer system designed to perform one or a few dedicated functions. Embedded systems are especially suited for use in transportation, fire safety, safety and security, medical applications and life critical systems as these systems can be isolated from hacking and thus be more reliable.
In order to pursue your masters, you can try in various universities in U.S. and U.K. where it is a very common course and a lot of universities offer it. Few good universities are SUSSEX, KENT, BIRMINGHAM, BRADFORD in U.K. and in U.S. University of Pennsylvania, George Mason University, University of California Irvine etc.
But as you have asked this question under Germany, I would like to say that though Germany is one of the countries known for technological advancements, embedded systems is a very rare course there. One of the university that you can look for in Germany is University of Kaiserslautern, Mannheim University of Applied Sciences, University of Stuttgart, University of Paderborn etc.
Hope this helps.
Thanks
All The Best!

Dear abhishek,
I list some of the best colleges in mumbai for engineering,
Thadomal Shahani Engineering College (TSEC)
WATUMULL INSTITUTE OF ELECTRONICS ENGINEERING & COMPUTER TECHNOLOGY
KJ Somaiya College of Engineering
Atharva College of Engineering
Parshvanath College of Engineering
DATTA MEGHE COLLEGE OF ENGINEERING
M. H. Saboo Siddik College of Engineering
Jawaharlal Nehru Engineering College
Lokmanya Tilak College of Engineering
Pratisthan College of Engineering
Rizvi College Of Engineering
with your expected percentage I belive you can have an admission in any of the top colleges mentioned,
for correct cut-off's details I request to follow your targeted college.
Hope it was of help,
In case of any doubt feel free to reply,
If you like my answer choose it as best answer,
Wish you best,
Arun.

one simple question for u - U must have some sort of computer knowledge i know cos now a days computer has taken place of TV at home. If my Hard Disk gone damage should i replace or repair? If Motherboard got damage will it be repaired or replaced? Now a days all these r coming with 3-5 years of warranty. Processor can not be repaired. What other expensive things remain on computer which can be repaired. I think replacement is the best option now a days. For making parts replaced do u think u must have to do the course of 18 months or so and invest around 55-60 thousand on Hardware & Networking course. After that u will get a National level of certificate. Instead of that if u go for any International Certifications like RHCE+CCNA+MCSE+RHCVA in a shorter amount of time and invest ur more time on the field for getting experience. Which will be the wise answer u just ask to urself and do the rest. Best of luck if u want more details write back to naidu.vikas@gmail.com

If u want to do HR mgmt then MBA (HR mgmt) will be the best option for you. There are plenty of UGC recognised univs offering MBA (HRM). In case u hv already decided on MITSDE then it is absolutely ok as they are approved by DEC but u will be given a pgdba, so just in case this subject really interests u and want to pursue further studies 2 yrs hence, it might not b possible as it is just a PG diploma and not masters. Masters can only be conferred by universities or instituitions affiliated to univs, tho not much difference between PGDBA and MBA syllabus being almost the same. As a matter of fact syllabus of institutions like MITSDE, NMIMS, Welingkar or Symbiosis are far better than univs (others counsellors may disagree, but thats my opinion as i been thru a couple of diff univ/institution syllabus). HRM has vast potential as there are hardly any companies tht can do without HR dept. It has good scope and if planned properly can take u to ur goal. So complete ur PGDBA/MBA and u already being a PG ur target shudnt be too far. all the best!!!!

If u want to do HR mgmt then MBA (HR mgmt) will be the best option for you. There are plenty of UGC recognised univs offering MBA (HRM). In case u hv already decided on MITSDE then it is absolutely ok as they are approved by DEC but u will be given a pgdba, so just in case this subject really interests u and want to pursue further studies 2 yrs hence, it might not b possible as it is just a PG diploma and not masters. Masters can only be conferred by universities or instituitions affiliated to univs, tho not much difference between PGDBA and MBA syllabus being almost the same. As a matter of fact syllabus of institutions like MITSDE, NMIMS, Welingkar or Symbiosis are far better than univs (others counsellors may disagree, but thats my opinion as i been thru a couple of diff univ/institution syllabus). HRM has vast potential as there are hardly any companies tht can do without HR dept. It has good scope and if planned properly can take u to ur goal. So complete ur PGDBA/MBA and u already being a PG ur target shudnt be too far. all the best!!!!

Before pursuing any course in creative course. you should first analyze you level of creativity that will help you to choose from various option Creative fields consists various options : 2D,3D,Web designing, VFX, Graphic Design, Architecture, Interior Design, photography, filmmaking and many more. Creativity is the main essence of abovementioned fields.
Graphic designer, visualizer, Creative director, 3d artist, 2d/3d animator, game tester,3d Architect visualizer, trainer, mentor, Copywriter, freelance filmmaker (documentaries), flash artist, web designer, product visualizer, roto-artist, editor, motion graphic artist etc; are some of the roles you can choose to be in future. And it all depends on the type of curriculum/ courses/softwares you choose. From entry level to expert level, we provide guidance that will help you grow in future.
We, at Ostroni, help students to identify the scope of 50+ creative fields they can choose as a career option. Contact us for FREE CONSULTATION at: help@ostroni.com. We are a career & education consultants and we provide career guidance to the students. We act as a service organization or bureau for providing advice, services and training to human workforce.

Hi Priyanka,
# No, home-study is not a good option if you wish to learn a course like interior design which will prepare you with the technical knowledge, artistic awareness, innovativeness and attitude that are necessary for this occupation which will be difficult to attain at correspondence level.
You may join part-time/weekend batches OR Diploma/Certificate course if you wish to pursue it alongside B.Com.
# However, I would suggest you to continue with B.Com and after that you may start up with interior training because a valid graduation degree is always useful.
Please feel free to discuss more. Click on the thumbs up or mark it as the best, if you found this useful.
Wish You Luck!

Hi Manjanna, I am immensely thrilled and excited to know about your interest in jewellery as it is one of the most lucrative career option. If you are creative, the jewellery industry is actually a viable option.
# Well, to start up a jewellery shop you need to you need to keep certain pointers in mind :
1) Make a detailed business plan. Outline the full operation and expectations of your jewelry business.
2) Gather capital. Apply for small business loans and credit cards through your bank.
3) Submit applicable paperwork. Check the local Register of Deeds office for an updated list of permits and licenses you'll require to open your jewelry business.
4) Conduct research. Get a feel for what members of your target market desire.
5) Secure a business location.
6) Gather store inventory.
7) Hire qualified employees.
8) Promote your business.
# To prepare yourself for the field, below is the list of institutes in and around Bangalore. Please refer to it.
tinyurl.com/csj88kr (Link : Bangalore)
tinyurl.com/d4dc5pz
(Please place the link in the address bar.)
# After the course completion you may work as :
-Jewellery Designer
-Export House Designer

U can go for distance education wherein u can directly gain entry into the third yr also known as lateral entry. There are many universities that gives such entry, for example- bharathiar, annamalai, bharathidasan, vinayaka missions and many other universities. U have to attend their personal contact progs once in a year which is conducted in your own cities. for some universities u have to attend their practicals in their campus like annamalai univ, u can choose ur examination (written) centre as per ur convenience from their list. for practicals Some univs arrange it in ur city or where ur study centre is. for more univs u can refer their respective websites to get further details

Hi Akshay,
# firstly, I would request you to kindly re-frame the query and mention specifically :
-Academic background
-What do you mean by 'Cut-Off'
-Name of the entrance exam in which you scored 150
# However, a course in Aircraft Maintenance Engineering is not a degree but a license course and only those institutes approved by DGCA can impart training in this subject.
A student from the science stream with a minimum of 50% (some institutes need 60%) in class 12th is eligible for a 3 year certificate course on aircraft maintenance engineering conducted by training schools approved by the DGCA.
For the list of recognized institutes offering AME course. Please follow the below link.
www.dgca.nic.in.
(Please place the link in the address bar.)
Please visit the official website of the above mentioned institutes for detailed information regarding eligibility, course, fee, etc.
Please feel free to discuss more. Click on the thumbs up or mark it as the best, if you found this useful.
Wish You Luck!